Ga naar de startpagina
Zoek leermateriaalKennis & expertiseCommunities
NL|EN
Privacy policyDeelnemende instellingen
Creative CommonsCreative Commons AttributionSURFFunded by the European Union

Filteren

Zoekresultaten (57)

…

HBO/WO

MBO

30 september 2025

Spray Painting Glass

In this video, Emanuel Nowak and Matthias Seel detail an innovative and experimental process for Spray Printing Glass. The project began as a seemingly impossible challenge from a colleague, Erwin, to create glass structures using a modified airbrush system. The team, including a glassblower and engineers, adapted a metal repair torch to spray 100-micron thick soda-lime and borosilicate glass beads onto various substrates like stone, glass, and woven sheets. The initial results were rough and porous, with a "Swiss cheese"-like structure at the interface between the print and the base plate. Through iterative experimentation, they refined the process by adjusting parameters like the burner type, nozzle heat, and using a heating chamber. This led to more transparent, translucent prints with fewer pores and better adhesion, allowing them to create larger and more complex small-scale structures. The vision for this technique spans from artistic applications like glass graffiti to functional architectural panels with potential for improved stiffness or acoustic performance. The video was produced by the Open GLASSroom project. Special thanks to Emanuel Nowak and Matthias Seel for contributing to the Open GLASSroom OER collection. The creation of these resources has been (partially) funded by the ERASMUS+ grant program of the European Union under grant no. 2022-1-DE01-KA220-HED-000089750. Neither the European Commission nor the project's national funding agency DAAD are responsible for the content or liable for any losses or damage resulting of the use of these resources.

Video

Emanuel Nowak, Matthias Seel

27 november 2024

3D Printing of Glass

In comparison to traditional glass casting, 3D printing or additive manufacturing of glass presents an opportunity to increase design flexibility and reduce tooling costs for the production of highly variable geometries. In this video, Daniel Massimino discusses the fabrication and potential applications of 3D printed interlocking glass masonry. To learn more about Daniel's research at the Massachusetts Institute of Technology (MIT), a link to an open-access research paper published in the Glass Structures & Engineering journal is provided. The interview was recorded at the Challenging Glass Conference 9 in June 2024 in Delft. The video was produced by the Open GLASSroom project, in collaboration with the NewMedia Centre at TU Delft. The creation of these resources has been (partially) funded by the ERASMUS+ grant program of the European Union under grant no. 2022-1-DE01-KA220-HED-000089750. Neither the European Commission nor the project's national funding agency DAAD are responsible for the content or liable for any losses or damage resulting of the use of these resources.

Video

Daniel Massimino

28 november 2024

Glass Cube in Wassenaar

In this video, Erwin ten Brincke discusses the design process of the Glass Cube for displaying art in Wassenaar. The client envisioned a transparent structure, which led to a focus on creating a sturdy, reusable, and modular system. A key innovation in this project is the T-shaped, reversible/demountable connection designed to handle vertical and lateral wind forces. The interview was recorded at the Challenging Glass Conference 9 in June 2024 in Delft. The video was produced by the Open GLASSroom project, in collaboration with the NewMedia Centre at TU Delft. The creation of these resources has been (partially) funded by the ERASMUS+ grant program of the European Union under grant no. 2022-1-DE01-KA220-HED-000089750. Neither the European Commission nor the project's national funding agency DAAD are responsible for the content or liable for any losses or damage resulting of the use of these resources.

Video

Erwin ten Brincke

2021

Glass Structure

Animation of the glass structure of soda-lime-silica glass

Video

Sindy Fuhrmann, Christiane Kothe, Juliane Wohlgemuth, Christian Louter

26 oktober 2025

Glass Sustainability: Reuse

In this video, Angelica Rota explains the concept and process of reusing architectural glass. Reusing glass panels or entire insulating glass units (IGUs) avoids the energy-intensive melting process of recycling, reducing CO2 emissions and preserving the material's quality. The process involves harvesting glass from buildings through selective deconstruction, followed by a complex disassembly to separate the glass from frames and spacers, and a critical quality assessment to sort the glass by its reuse potential. Despite its environmental benefits, glass reuse faces significant challenges. The disassembly of IGUs is complex and time-consuming, the logistics of handling large, brittle panels are difficult, and there is a lack of a strong market for secondary glass. Furthermore, collaboration across the supply chain, supportive regulations, and further research on issues like non-destructive quality testing are needed to make glass reuse a more viable and widespread practice. The video was produced by the Open GLASSroom project. Special thanks to Angelica Rota for contributing to the Open GLASSroom OER collection. The creation of these resources has been (partially) funded by the ERASMUS+ grant program of the European Union under grant no. 2022-1-DE01-KA220-HED-000089750. Neither the European Commission nor the project's national funding agency DAAD are responsible for the content or liable for any losses or damage resulting of the use of these resources.

Video

Angelica Rota

12 oktober 2025

Float Glass: Primary Glass Manufactoring and Mechanical Properties

In this video Mauro Overend explains the well-known properties of glass and how they result from its manufacturing process. Glass is an optically transparent but brittle material, making it ideal for architecture yet prone to sudden breakage. The video focuses on the industrial float glass process, invented by Alastair Pilkington in the 1950s. This process involves melting raw materials like silica sand, soda, and lime at 1500°C. The molten glass is then floated on a bath of molten tin, where it cools and solidifies into a flat uniform sheet. This rapid, controlled cooling results in an "amorphous isotropic solid," which gives glass its transparency, perfect elasticity, and brittleness. The glass is then annealed (gradually cooled) to minimize internal stresses, making it possible to cut. The final product, known as annealed float glass, is the base material for most architectural applications. The video was produced by the Open GLASSroom project. Special thanks to Mauro Overend for contributing to the Open GLASSroom OER collection. The creation of these resources has been (partially) funded by the ERASMUS+ grant program of the European Union under grant no. 2022-1-DE01-KA220-HED-000089750. Neither the European Commission nor the project's national funding agency DAAD are responsible for the content or liable for any losses or damage resulting of the use of these resources.

Video

Mauro Overend

12 oktober 2025

Glass Sustainability: Recycling

In this video Faidra Oikonomopoulou & Telesilla Bristogianni explain that while glass is 100% recyclable in theory, in practice, successful closed-loop recycling is largely limited to the container industry (bottles and jars). For other glass products, like architectural and automotive glass, recycling rates are very low, with most post-consumer waste being downcycled or landfilled. The main barriers are technical, such as contamination from coatings and chemical incompatibility between different glass types, and logistical, including the difficult disassembly of complex products like windows. The video contrasts the high recycling rate of glass bottles in the EU (76%) with the minimal recycling of post-consumer float glass from buildings (under 1%). Solutions proposed include investing in new recycling methods like casting, establishing better collection facilities, implementing tracking systems for building materials, and designing products for disassembly from the start. The video concludes that overcoming these barriers is key to unlocking the full potential of glass recycling. The video was produced by the Open GLASSroom project. Special thanks to Faidra Oikonomopoulou & Telesilla Bristogianni for contributing to the Open GLASSroom OER collection. The creation of these resources has been (partially) funded by the ERASMUS+ grant program of the European Union under grant no. 2022-1-DE01-KA220-HED-000089750. Neither the European Commission nor the project's national funding agency DAAD are responsible for the content or liable for any losses or damage resulting of the use of these resources.

Video

Faidra Oikonomopoulou

4 juni 2024

A Brief History of Window Glass

The video "A Brief History of Window Glass" presents an overview of production and use of glass in architecture from the 1st to the 19th century. The first attempts to shape glass window panels were recorded as early as the 1st century BC, wider application began in the first half of the 1st century, while the glass blowing techniques were more intensively practiced only from the 3rd-4th century. Each historical period has its own specifics in terms of production, and especially the way window glass is used in everyday life. The video was produced by the Open GLASSroom project, in collaboration with the Museum of Ancient Glass in Zadar, Croatia. It is based on the exhibition "A Brief History of Window Glass" curated by Vedrana Jović Gazić, and the exhibition catalogue published by the Museum of Ancient Glass in Zadar. The original language of the video is Croatian. To view it with English subtitles and/or transcript, please follow the provided youtube link. The bilingual Croatian-English exhibition catalogue, as well as timecoded subtitles and video transcript in English and Croatian can also be separately downloaded. The creation of these resources has been (partially) funded by the ERASMUS+ grant program of the European Union under grant no. 2022-1-DE01-KA220-HED-000089750. Neither the European Commission nor the project's national funding agency DAAD are responsible for the content or liable for any losses or damage resulting of the use of these resources.

Video

Vedrana Jović Gazić, Jagoda Cupać

23 september 2025

Cast Glass

In this video, Telesilla Bristogianni and Faidra Oikonomopoulou explain the process and potential of glass casting as a method for creating three-dimensional architectural components. This technique allows for the creation of complex, solid glass shapes that fully utilize the material's high compressive strength. The process is divided into two main types based on the starting state of the glass. Primary casting involves founding glass from raw ingredients and includes methods like hot pouring. Secondary casting, or kiln casting, involves reheating pre-made solid glass pieces in a single kiln. A critical step is annealing, the controlled cooling to relieve internal stresses, a process that becomes lengthier for thicker pieces. The molds that are used are either disposable (for unique shapes, rough finish) or permanent (for series production, smooth finish). The main architectural limitation is the immense annealing time for large components, confining most applications to brick-sized units. However, topology optimization (reducing mass while maintaining stiffness) can drastically cut cooling times, enabling future large-scale, monolithic glass structures. The video was produced by the Open GLASSroom project. Special thanks to Telesilla Bristogianni and Faidra Oikonomopoulou for contributing to the Open GLASSroom OER collection. The creation of these resources has been (partially) funded by the ERASMUS+ grant program of the European Union under grant no. 2022-1-DE01-KA220-HED-000089750. Neither the European Commission nor the project's national funding agency DAAD are responsible for the content or liable for any losses or damage resulting of the use of these resources.

Video

Faidra Oikonomopoulou, Telesilla Bristogianni

12 oktober 2025

Float Glass: Secondary Glass Manufactoring and Mechanical Properties

In this video Mauro Overend explains how annealed glass is strengthened after its initial production. The primary method is thermal treatment, known as tempering or toughening, where the glass is heated and then rapidly cooled. This process creates internal stresses, putting the outer surfaces in compression and the inner core in tension, which significantly increases the glass's strength. There are two grades: fully-toughened (tempered) glass, which is 3-4 times stronger than annealed glass and breaks into small, less hazardous fragments, and heat-strengthened glass, which is about twice as strong but breaks into larger, sharper shards. The video also covers lamination, a process where two or more glass sheets are bonded with an interlayer (like PVB or SentryGlas®) using heat and pressure. Laminated glass holds together when broken, preventing injuries from falling shards and providing post-fracture resistance, which is essential for safety applications like balustrades and overhead glazing. These secondary processes are crucial for improving the strength and safety of glass in architectural applications. The video was produced by the Open GLASSroom project. Special thanks to Mauro Overend for contributing to the Open GLASSroom OER collection. The creation of these resources has been (partially) funded by the ERASMUS+ grant program of the European Union under grant no. 2022-1-DE01-KA220-HED-000089750. Neither the European Commission nor the project's national funding agency DAAD are responsible for the content or liable for any losses or damage resulting of the use of these resources.

Video

Mauro Overend