Ga naar de startpagina
Zoek leermateriaalKennis & expertiseCommunities
NL|EN
Privacy policyDeelnemende instellingen
Creative CommonsCreative Commons AttributionSURFFunded by the European Union

Glass Codes & Standards

Collectievan Open GLASSroom

Filteren

HBO/WO

MBO

8 resultaten in “Glass Codes & Standards”of zoek in alle leermaterialen

12 november 2025

Lateral Load Resistance of Glass Pane According to EN 16612

In this video, Martina Eliášová introduces the European standard EN 16612 for determining the lateral load resistance of glass panes used as infill panels in windows and facades. The standard provides design procedures for monolithic, laminated, or insulated glass that is simply supported around its edges and subjected to uniform loads like wind or thermal stress. The design follows the limit state method, which includes checking the Ultimate Limit State (to prevent collapse by ensuring design tensile stress is less than the design glass strength) and the Serviceability Limit State (to control deformation). A key aspect is the use of partial safety factors, where design loads are increased and material strengths are reduced. The design bending strength of glass is significantly influenced by the load duration (through the Kmod factor), the edge condition (Ke factor), and the glass surface profile (Ksp factor), with specific characteristic strength values and adjustment factors provided for different glass types like annealed and pre-stressed glass. The video was produced by the Open GLASSroom project. Special thanks to Martina Eliášová for contributing to the Open GLASSroom OER collection. The creation of these resources has been (partially) funded by the ERASMUS+ grant program of the European Union under grant no. 2022-1-DE01-KA220-HED-000089750. Neither the European Commission nor the project's national funding agency DAAD are responsible for the content or liable for any losses or damage resulting of the use of these resources.

Video

Martina Eliasova

7 november 2025

Understanding Glass Codes and Standards

In this video, Martina Eliášová outlines the critical role of codes and standards in the use of structural glass in modern architecture. As glass evolves from a simple infill material to a primary structural element in beams, columns, and load-bearing walls, ensuring safety becomes paramount. The framework has evolved from national standards to unified European Eurocodes, which harmonize design, manufacturing, and testing rules across the EU to ensure quality and safety. The key groups of standards cover glass production, material property determination (e.g., EN 1288, EN 16612), and the design of load-bearing structures (with the upcoming EN 19100). Essential testing standards are also outlined, including those for impact resistance from human bodies (EN 12600), manual burglary attacks (EN 356), and resistance to firearms and explosions, all necessary to meet the reliability and safety requirements for building structures throughout their service life. The video was produced by the Open GLASSroom project. Special thanks to Martina Eliášová for contributing to the Open GLASSroom OER collection. The creation of these resources has been (partially) funded by the ERASMUS+ grant program of the European Union under grant no. 2022-1-DE01-KA220-HED-000089750. Neither the European Commission nor the project's national funding agency DAAD are responsible for the content or liable for any losses or damage resulting of the use of these resources.

Video

Martina Eliasova

31 oktober 2025

Bomb Blast Testing

In this video, Andrej Vorkapić details the engineering and testing processes behind bomb blast-resistant facades, explaining that such protection is needed for public buildings and high-risk sites due to threats from terrorism, military action, or accidental industrial explosions. The main danger is the air shock wave from a blast, characterized by its peak pressure and impulse. A successful facade must protect occupants and the main structure, prevent pressure penetration, and—critically—not generate hazardous fragments. While frames can be made from ductile materials like steel or aluminum, the brittle nature of glass is overcome by using laminated glass with a PVB interlayer, which holds the broken pieces in place. The most reliable validation method is physical testing, with two primary types discussed: the cost-effective but incomplete shock tube test and the expensive but highly realistic range test, which was successfully demonstrated on a full-scale sample designed to withstand a 200kg TNT car bomb simulation. The video was produced by the Open GLASSroom project. Special thanks to Andrej Vorkapić and Nebojša Buljan for contributing to the Open GLASSroom OER collection. The creation of these resources has been (partially) funded by the ERASMUS+ grant program of the European Union under grant no. 2022-1-DE01-KA220-HED-000089750. Neither the European Commission nor the project's national funding agency DAAD are responsible for the content or liable for any losses or damage resulting of the use of these resources.

Video

Andrej Vorkapić, Nebojša Buljan

26 oktober 2025

Comparative Analysis of the Glass Plate Design

In this video, Ivana Rakić presents a comparative analysis of the economic impact of designing glass elements according to different standards, focusing on the new European draft standard FprEN 19100-1(2,3):2023, the existing EN 16612:2019, and the American ASTM E1300-16. The study examines common double-glazed insulating units under wind load, using the minimal required glass thickness for loadbearing resistance as the key comparison criterion. The results indicate that for annealed glass, all three standards yield similar economic outcomes. However, for heat-treated glass like heat-strengthened and thermally toughened glass, the new FprEN 19100 standard leads to a lower capacity utilisation factor, making it the most economical design choice, while the ASTM standard is the least economical. The analysis concludes that the choice of standard significantly influences design economy and highlights the need for further research incorporating factors like safety and long-term performance for a more comprehensive understanding. The video was produced by the Open GLASSroom project. Special thanks to Ivana Rakić and Nebojša Buljan for contributing to the Open GLASSroom OER collection. The creation of these resources has been (partially) funded by the ERASMUS+ grant program of the European Union under grant no. 2022-1-DE01-KA220-HED-000089750. Neither the European Commission nor the project's national funding agency DAAD are responsible for the content or liable for any losses or damage resulting of the use of these resources.

Video

Ivana Rakić, Nebojša Buljan

12 oktober 2025

Effective Thickness Method

In this video Martina Eliášová explains how the polymer interlayer between glass panes influences the performance of structural elements like floors and roofs. The key property is the interlayer's shear modulus, which is highly dependent on temperature and load duration. At high temperatures or under long-term loads, the shear modulus is low, and the glass panes behave more independently. At low temperatures or under short-term loads, the shear modulus is high, causing the panes to act as a single, monolithic unit. This variable behavior must be considered in design to accurately calculate stress and deflection. The video mentions that modern standards, like the effective thickness method in EN 16612, provide simplified analytical models to account for this partial shear interaction, leading to more economical and accurate designs than older, more conservative practices. The video was produced by the Open GLASSroom project. Special thanks to Martina Eliášová for contributing to the Open GLASSroom OER collection. The creation of these resources has been (partially) funded by the ERASMUS+ grant program of the European Union under grant no. 2022-1-DE01-KA220-HED-000089750. Neither the European Commission nor the project's national funding agency DAAD are responsible for the content or liable for any losses or damage resulting of the use of these resources.

Video

Martina Eliasova

2022

Four-Point Bending Test (EN 1288-3)

Four-point bending test of glass according to DIN EN 1288-3 standard with explanatory subtitles

Video

Christian Louter, Jan Ebert, Iris Vogt

2021

Glass Fracture Patterns - Pendulum Test (EN 12600)

Glass fracture patterns demonstrated by means of the pendulum test according to EN 12600 standard with explanatory subtitles

Video

Christian Louter, Jan Ebert

2021

Laminated Safety Glass with PVB-interlayer - Ball Drop Test (DIN EN 356)

Classification of security glazing demonstrated with a ball drop test, according to DIN EN 356 standard, with explanatory subtitles

Video

Christian Louter, Jan Ebert